...disconnect the power cable from machine before doing it !!!! Check as well for valve's coil resistance. In case you have no resistance measurement - you should replace it for a new one. Good ...
...check that the inlet solenoid valve has not got blocked. If none of the above help, check that there is power getting to the solenoid valve when the machine is supposed to be on the fill cycle. If no ...
Question about Kenmore Elite Washing Machines
valve, check the crisscross plastic at the center of the inlet valve, that is the inlet valve water filter. clean it if it is dirty or clogged. if there is no power, check the wires that goes into it.
Question about Kenmore Elite Washing Machines
...check to see if the screens inside the water-inlet valve are clean. (The water-inlet valve is the device on the washing machine that the fill hoses are attached to.) If they're clean, you probably ...
Question about Kenmore Elite Washing Machines
...Check for plugged or kinked inlet hoses or plugged screens in the inlet valves. Verify inlet valve operation. If there is water in the unit: Verify drain pump operation. Verify that the pressure ...
...valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect.You will need to remove the unit and check the power to the processor, ...
Question about Kenmore Elite Washing Machines
...Check for plugged or kinked inlet hoses or plugged screens in the inlet valves. - Verify inlet valve operation. ? If there is water in the unit: - Verify drain pump operation. - Verify that the ...
...check these: Water-inlet valve Float switch Water-inlet valve The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located ...
how do you check the inlet valve? all of my lines are clear but I am not getting water to the machine, You will need to make a 110v power cord with spades to fit the valve.
...Check for plugged or kinked inlet hoses or plugged screens in the inlet valves. - Verify inlet valve operation. ? If there is water in the unit: - Verify drain pump operation. - Verify that the ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions
