Kenmore Elite 45986 Front Load Washer "bellow replacement he4t" Questions

Ad

Question about Kenmore Elite Washing Machines

1 Answer

...HE4t washer, and I need to replace it. Do you have any instructions on how to remove the old one & install the new? When you get the bellows repair kit for your model, it should have the instructions ...

Ad

Question about Kenmore Elite Washing Machines

2 Answers

...HE4t front-loading washer and evidently got a piece of clothing stuck in the door. The offending shirt got so twisted that it ripped, and it also pulled the door gasket off the door. I got the gasket ...

Ad

Question about Kenmore Elite Washing Machines

1 Answer

...bellow_on_a_front_load Replacement parts (if required) can be purchased from any of the following websites: searspartsdirect.com pcappliancerepair.com appliancepartspros.com repairclinic.com Prices ...

Question about Kenmore Elite Washing Machines

1 Answer

...replacement bellow isn't cheap (prices vary, but are around $75-80), so hopefully these helpful steps will eliminate the need to call a repair service and pay the additional labor charges. This is a ...

Question about Kenmore Elite Washing Machines

15 Answers

...bellow snugly around the lip seal of the door opening. Place the the wire hoop in the groove, starting from the top and work your way all the way around the seal on both sides with both hands until ...

Question about Kenmore Washing Machines

1 Answer

how to replace the bellow I have the Sears repair person here right now. $216.25 for parts and labor. I looked at other posts and I got worried about the clamp. I don't have the strongest hands.

...bellow on a kenmore elite he4t washer Hi. Open up the back of the dryer after unplugging it. Take a deep breath. This is not that hard. A dryer is a very simple thing but you need to relax and figure ...

Question about Kenmore Washing Machines

1 Answer

...about 12 screws. (Note, the following works for replace the pump as well) 7. Remove the large bellow from the bottom of the tub that goets to inlet of the pump by removing the clamp 9. Lift up ...

...HE4T front load washer. Washer goes through cycle fine, pumps fine but next day, water appears in tub. This problem can be caused by either a leaking water inlet valve, or a condition known as ...

Question about Whirlpool Washing Machines

2 Answers

...to completely dissolve the detergent, pause the washer, open the door and swab down the complete bellows assembly including the hidden folds and adjoining areas where the bellows attaches to the ...

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

4,938 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...