...start switch being used. Good day, The dryer start switch, starts the motor by bypassing the centrifugal switch built into the motor. Once the motor is running, releasing the switch doesn't matter ...
Question about Whirlpool Dryers
...start switch? Want to remove and replace the start switch Part WP 3398094 on an Amana clothes dryer Model NED5500TQ0. I have removed the access panel. Can't figure out how to remove the part. Push to ...
...start switch, bad door switch, broken belt, bad timer, bad thermal fuse, etc. Most likely, the door switch or start switch is the problem. Unplug the dryer! Check the door switch for continuity, when ...
...start switch (door closed). The dryer only stops when it reaches the end of the dry cycle. When I move the mode/time selector switch to run another load the dryer again starts without turning the ...
...switch. you can try to press it with a screwdriver or something while turning on sryer start. also you can bypass the switch by taping the wires together and see if it then works. switches are
Question about Dryers
Start switch does not Start Kenmore Elite Dryer Mod # 11065944401 Push to Start button switch does not start dryer. If I direct short the terminals on the back of the switch (or just push the switch),
...start switch is pushed in. i replaced the switch and it still does the same thing The centrifugal switch on the motor has probably failed. This switch is engaged when the motor starts turning and ...
...switch to start it only hums. What could be the problem, it is only 3 years old. Thank you First of all check your door switch, make sure it is operational.If the door switch checks good, the start ...
Question about Speed Queen Dryers
...start switch you can eliminate the start switch as the problem. The switch acts as an open in the start control wiring. If the unit starts when you jumper across the switch, then replace the switch. ...
...start you have to check the door switch. if switch is ok and still unit don't start check the starting capacitor if equipped. replace if bad. if unit won't start even with a good capacitor and good ...
167 questions posted
Usually answered in minutes!
1,329 Questions
1,410 Questions
750 Questions
524 Questions
182 Questions