Frigidaire ATF6700FS Front Load Washer "washing machine door alignment" Questions

washing machine and the door does nto want to stay open (at 90degre open). It is balance. i can see that it is a door issue. how can i align the door GRAB THE DOOR UNDERNEATH AND PULL UPWARD VERY HARD

...washing machines made with a "door locking mechanism" to prevent opening door during a spin cycle. The "door locking mechanism" adjustable and often continued slamming or hard closing of door causes ...

...was shifted and so the door hinges are out of place.Check this link for ...

...I paused the machine, added an item and tried to close the door. The door lock light comes on for a few seconds then shuts off and of course the washer won't start. door switch is out of ...

...washing machine. Put it all back together, but now the front won't align. It is too high to go into the top part. When I just try and manually align the top, the bottom doesn't align and will not go ...

washing a load there remained 1 min and the door would not unlock. I manually unlock the door, load was spun out, but could not get another load started. No error code, power and options come up fine,

...door sometimes it is loose align it, reset your machine, if it is still the same, now take a look on the rubber gasket attached to the shell cabinet, there is a big plastic clamp or a rounded wire ...

when start wash it says door open.. the door is closed? The door is bent out of place or not aligned or the door switch is bad or loose. Without knowing the make and model number, that is all I can ...

How do i align my frigidaire front loading washer door? The door sags so that the door strike aligns below the receiver. I have been trying to adjust the door hinge with no improvement, then replaced ...

...door alignment as well. if the door is slightly mis-aligned, this will prevent the seal from making contact with the door frame in a appropriate manner, in return, causing a slight leak during the ...