Kenmore 63942 Dryer "heating element 70 series" Questions

Ad

...heating element in a Kenmore 70 series dryer model 110.96575100 the part number you will need is 279838 and you can get that at whirlpoolpartssurplus.com My Kenmore series 70 won't heat. I have a ...

Ad

...but will rotate. kenmore series 70 electric dryer will not heat up, it will trun but will not heat up. remove the back cover and check the heater box fuse and the heating element,do you have a

Ad

...series dryer. 220 to machine is good, reading 120 at all internal terminals accessible from back panel. No heat. You either have :-A bad heating element-A bad thermal cut-off-ThermostatOR-A bad

...70 Series Electric Dryer runs, but won't heat up to dry clothes check the thermal fuse if it is blown also change the high limit thermal cut-off fuse www.repairclinic.com shows your parts. go there ...

Question about Kenmore Dryers

1 Answer

heating element thermostats check ok with ohm meter If heating element was replaced and still no heat, Then what I would do is test the voltage current in the wiring and see if there is actually power

Question about Dryers

1 Answer

...won't heat Dryer will not heat where is the fuse located kenmore 70 series Dryer Hi Jason There is no fuse to replace only thermostats/thermistors...and heating element. Here is some things to

Question about Kenmore Dryers

4 Answers

...heating element test ok. How do I check the thermostate, and timer. I have the same problem. Did some research, found the thermal limit fuse is a common failure. Took the back off, found the fuse. No ...

Question about Kenmore Dryers

1 Answer

...heating element and the thermal cut out kit, visit whirlpoolpartssurplus.com and read how to or you can call and i will walk you through it.. but its the heating element or thermal worst case is the ...

heating element or coils not glowing and getting no heat model is a kenmore 70 series and is electric Bad Thermal High limt, Bad Thermistor, Bad heat element. Need model number, located on inside of ...

...heating element would be a likely cause however before you replace the element you should check to make sure that it is bad by using an ohm meter to check the element for continuity. if you take the ...

Not finding what you are looking for?
Kenmore 63942 Dryer Logo

1,555 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2526 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...