Kenmore 63942 Dryer "gas stay letting start" Questions

...gas dryer doesn't stay on My dryer will turn on with the start/stop switch, but once I release the button, it will not stay running. I have already replaced the stop/start switch and the door switch. ...

gas dryer doesn't stay running have to hold button down. Kenmore gas dryer. Last week I started the dryer and after 2 min it stopped running. When you push the start button and hold it dryer runs. But

gas dryer's start button doesn't stay engaged Pushed start button and the drum begins tumbling but when I let off the start button, the drum quits turning. Heating and drying good until this problem. ...

...Gas dryer won't stay on As long as I'm holding the start button in on my kenmore gas dryer, it stays on- as soon as I let go of the button, the dryer goes off . in the control board you should have a ...

...stay turned on. As soon a you let go of the start button it stops Hi, If you have a gas dryer. The most common problem with a gas and no heat is the ignitor going bad... Here is a tip that I wrote ...

...stay lit gas dryer will not stay lit I'm assuming it "starts" to heat but then cuts off. Usually after the first minute of running you can open dryer door and feel heat but after awhile it doesn't ...

...start button the dryer starts but won't stay running - the minute I let go of the button it stops. Hi, There can be many reasons why your dryer will not turn... This tip that I wrote will help you to ...

...gas dryer model # 70992990 <And when i push the start button and let off it wont stay running! Can you help? Hi, There can be many reasons why your dryer will not start or turn... The most common ...

...STAY ON. DOES NOT TRIP THE GFI IT'S PLUGGED INTO. THE BUTTON I PRESS TO START THE DRYER IS ON TOP AND NO WHERE NEAR WHERE IT FLOODED..... It's possible you have damaged the gas control valve or ...

...stay lit When cold the dryer works only for about 5 minutes or less. If I let it rest for 10 minutes it will start up again meaning the fire box igniting. In otherwords, when cold after the igniter ...