on the bottom of your dryer, but there would also involve some reconfiguration of the internal vent duct
...possible. Normally you will need to remove the back panel and rotate the vent and add a lengthg of duct to reach the side panel and connect the rest of the
you will need to then install hard venting to reach the knock out on the side. Be sure to use metal duct tape when sealing the venting to avaoid fire haz
knocking sound in back of dryer if the lint filter is on top of dryer then your blower wheel will be in the back of dryer,this could be the problem,the wheel could of cracked or there could be lint ...
some can be converted to it with a kit. usually if they can there will be a knock out panel for the duct in that place. GEs heater is on back wall making more room on the base for this kind of thing
...from the side panel and relocate the exhisting hdwre. Knocking out a plug in the dryer, taking ducting loose, moving it around, putting in some new pieces, etc.,etc. Mostly mechanical stuff -- ...
...duct line from dryer to wall. Heat seems to be fine. Belt looks fine. What could be the problem? Hi, Here is a tip that I wrote about dryers and noises... It will help you determine what is happening ...
...wash the lint filter with vinegar and water, then soap and water. Vacuum all the internal ducting and the lint filter cavity. Use a folded wire coat hanger if necessary to knock the lint ...
Dryer not drying clothes My dryer is not producing heat to dry clothes, and the filter and exhaust ducts are clean and free of lint. your dryer is a 220 plug check the circuit breaker first one 110 ...
Kenmore 110.84821300 My dryer runs for so long, and never seems to get hot. Clothes smell bad, and they take forever to dry. At least an hour and a half. Every once in a while you'll also hear a ...
1,555 questions posted
Usually answered in minutes!
1,410 Questions
750 Questions
524 Questions
182 Questions
177 Questions