...is it just sliping round it? is the drum very tight to turn by hand? are the drum bearings jamed up, is any thing stuck behind the drum? ??? like one of the kid's? i hope this is helpfull to ...
Question about Indesit Dryers
...drum is not moving,i have looked at the belt and seems in tact. is your belt tight pull on the belt if tight it could be the motor It sounds like the belt has broken,there is a large belt which fits ...
drum does not turn, but belt is still in place (nice and tight). when you turn it on you can here it click, everything lights up, lint traps are clean. drum just wont turn It could be a bad motor...or
...reall easy to turn the drum then the belt is either off or broke. You can take off the top of the unit, and in the middle of the drum you should see the thin belt. It should be tight against the
on. Hi, Have you checked to see if the belt is loose? If it is tight and still routed correctly around the drum, motor and tensioning arm, I would suspect your motor needs replacing. Hope this helps..
Question about Indesit Dryers
...belts are standard or not its a posibilty you have the wrong belt as im asuming your your turning the drum when empty when you get it over the drum and motor should be really tight hope this helps ...
Question about Samsung Dryers
...Drum doesn't turn. Opened up the top panel and looked at the belt, it's fit tightly across the top of the drum, and when I spin the drum manually I can feel resistance. check the motor .... ...
...tight on the drum. Now hand rotate the drum and see if the tension of the belt turns with the motor and does not slip. IF it slips retension and recheck. If everything turns the way it should Put the ...
is not that is the belt a good tight fit on the drum??? is the motor turning? can you turn the drum by hand? if you cant turn the drum by hand its likley to be drum bearings stuck up or sezed up motor
Question about Frigidaire Dryers
drum? Or Tight drum even? If I open the dryer door and turn the drum it turns but not so freely. Also the drum has a little play up and down but hardly any. The metal part of the pulleys where hot so,
1,555 questions posted
Usually answered in minutes!
1,410 Questions
750 Questions
524 Questions
182 Questions
177 Questions