Kenwood DNX5140 Car GPS Receiver "remove" Questions

Ad

Question about Kenwood GPS

1 Answer

TomTom 0ne I have a new battery but cannot open the TomTom. I have removed the 4 screws on the back. Are there more screws? Barry There are 4 screws: 1. Remove front bezel 2. unscrew 4 small screws (1

Ad

Question about Kenwood GPS

1 Answer

get continuity you have discovered your problem. To repair you will need a number 6 torx driver and remove the 4 torx screws under the ends of the rubber strip (you don't have to remove the strip just

Ad

Question about Kenwood GPS

2 Answers

...i have bought a new battery for my tom tom go 300 but dont know how to install it, can you help.. Remove the Front facia surround Undo four screws holding internal works to outside body You will ...

how do i e remove tom tom from my computer Before you disconnect the tomtom (device) from your computer, you'll want to remove the device (safely). One way to do it is to select the TomTom device ...

Question about Garmin GPS

1 Answer

how do you open a nuvi 350 Lift the antenna and remove the two screws on the back.Carefully remove the antenna cover and with a small jewellers screwdriver move the left spring loaded hinge of the ...

how can I remove the back from my garmin nuvi 660 hi Davidflip up the antenna, then remove the two torx screws, then carefully remove the cover off the antenna that you just removed the screws, then ...

change the battery in agarmin nuvi 660 gps hi Davidflip up the antenna, then remove the two torx screws, then carefully remove the cover off the antenna that you just removed the screws, then look ...

Question about Goodyear GPS

1 Answer

antenna removal to instal a new antenna do I remove the part under the wipers or do I need to remove the fender? You don't have to remove the fender, there is a plastic mud guard between the wheel ...

Question about Mopar Performance GPS

1 Answer

...CEAL ON A 1995 Fig. Fig. 9: Removing the ball joint to steering knuckle clamp bolt Fig. Fig. 10: Remove the retaining bolt and remove the speedometer pinion from the transaxle assembly Fig. Fig.

how to remove rear wiper motor on 2009 chev uplander The rear wiper motor is accessed under the trim panel on the rear gate. You need to remove the panel ideally with the help of a panel removal tool

Not finding what you are looking for?
Kenwood DNX5140 Car GPS Receiver Logo

36 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood GPS Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Kenwood GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...