Kenwood KAC-5204 350 Watt Max Power Stereo Amplifier with Variable LPF "place ground car stereo" Questions

remote wire touched ground wire and stereo turned off. Any way i can fix this? may have to check fuse might be low or find a better ground area to place ground cord at

...other on a good ground. have a good ground? i found under the big bolt that hold the seat belt in place works good in most cars/trucks. make sure your remote wire is turned on. check fuses in the

...ground wire for the amp? If so where can I hook it up at. norally grounding them in the same place is ok but it could just theres not enough power from the amp too power two subs try hooking up one ...

...What exactly is hitting not as hard as they use to? Check your car stereo and your connections. Make sure your ground wire is tight and in place. That will affect your amps ability to produce ...

ground and when i push on it i get crackles and pops but no sound. Loose wire or connection is causing stereo to short out, Check all connections including amp,Stereo,Speakers and make sure nothing is

...ground then it goes red and buzzes at me. fuzes are good. I have no idea what to look for any help will be appreciated The RCA "plugs" should be in an OUTPUT of the radio (sometimes they are INPUTS, ...

...ground wire... i pluged the rca's back in but accidently placed them into the pre-outs instead of the Ch1. Ch2. - redlight flashed... i tried just correcting the rcas i have a green light... but no ...

...place I can get a manual for this amp?? OK, you run the RCA's from the stereo to the amp. The black is ground and you want this as short as possible. where you mount the amp the ground wire should be ...

...stereo that is the problem, but I have never had a problem like this. (All speakers are brand new as well). Any advice would be helpful. this is not an easy diagnostic ,companies hide these amps in ...

...from the head unit (blue wire), make sure you have your "feed" wire (blue) hooked up to the proper place on the head unit. Varify 12v from battery with multimeter. IF all that checks out...your amp ...