Kenwood KAC-5204 350 Watt Max Power Stereo Amplifier with Variable LPF "hooked amps sub amp wont" Questions

...check your sub wires.going to the amp....make sure the rca'sare hooked up to the radio rear out puts are the radio sub out puts...and then test your amp gain adjustment...let me know if that ...

...amp. If you got two 500 Watt subs then you got to find an amp that can put out 1000Watts anything less wont sound good and may burn out the subs because of too much distortion cause of lack of

hooked up to four subs two alpine type e's and two sony p5s. it just shut off and wont turn back on. i checked it and its getting power. are u sure you didn't blow a fuse? check the fuses to make sure

...are hooked up right, and making good contact, if the amp turns on and doesn't go into protect mode it should be alright. If you can't get it going, take it to an audio shop and have them test

...sub but it plays fine. all the wiring is hooked up right either its the rca input on the amp or something it is probably the rca inputs on the amp may have fried. was your cd decked turned up loudly ...

...hooked up to my 1000 watt sony explod 2 channel amp. It was working fine for about a week then the little power light that usually is green when working properly turned red and the Subs didn't work ...

...hooked up two 10" subs to a 2000 watt mono amp and they have never worked correctly with many variations of wiring....they always are unheard at low levels and if i turn up the volume they just peak ...

...amp is hooked up properly and the power light comes on (green)but there is nothing going to the subs, is there anything i can test or check for inside the amp??? hi if you got a voltmeter TEST IT ALL ...

...hooked up in my truck. i turn on the sterio and turn it up just a little bit and it goes into protect mode i cant figure out whats going wrong i gronded the wire to my seat bolt powerd it to a fuse ...

...a mono conection , meaning whatever quantity of subs you have hooked to your amplifier,their total impedance should the minimum the amp handles that way all the power from your amplifier will be