Gateway MX8738 MotherBoard - DAPA6AMB6D5 "hd removal" Questions

i get to the splash screen then it locks up!!! does the hd disks and drives reconized on bios scren? problebly some hd drives has fatal failure, and lock bios, try remove hd cable, and test if not try

...in a corrupt system without bootable?if yes then how? Hi, Basically yes. You need to remove the HD from the PC without any bootable devices and install it as a slave to a second PC preferably

...12DC1-MCP68AM2-100R Ver.1.0 GIGABIT Motherboard and Win.XP 2002 SP2 system. I can't launch Realtek HD control panel to set new inputs and I can't to reinstall Realtek HD drivers(Error ...

"install HD audio driver failure" my audio driver only is not working when it is installed it will showing " install HD audio driver failure" and when i put an external sound card, it is working. ...

Need to know where to hook up the card reader and 2nd HD. I have an ASUS M2N68-AM motherboard and I was looking for a schematic for this board to tell me where I can safely hook things up. I assume ...

no audio i already install the k888111 driver package and realtek hd driver.. but still i have no sound.. i try to uninstall realtek but this massage keep showing (unable to uninstall) You may not ...

can`t make contact with my externe-HD My driver from the externeal HD is uptodate but I can`t open de HD not on my PC and also not on my laptop The problem is probably with the external HDD drive ...

...tyoe of solution. thanks a million try to use another SATA drive in this machine...if this new HD is detected by this machine... try connect the old HD on another machine....if it cannot be read ...

IDE Problem (I Think) New mobo / case / PS kit form Tiger . Known good HD from previous box. With IDE and power connected, HD is dead. If I remove IDE (either from HD or mobo) HD spins up fine. Any ...

...or an External Hard-Drive. 2)Turn off the computer and unplug all the power supply wires. 3)If your HD is SATA, then unplug the cable attached to it. 4)If it is PATA(IDE), firstunplug the IDE cable ...