Gigabyte GA-EP45-UD3L Motherboard "change bios setting" Questions

...ensure that you download the correct bios for your board. There are a few options available. Also check the jumper pins for the bios on the motherboard normal or (default) setting is pins 1-2

...change any of the BIOS settings, save them as if you did and it will reboot. Should be OK then. Hold F2 or delete while starting computer. At Bios screen press f9 to set optimal defaults. Then press ...

...bios is not saving the changes . If it is not power off it will work. once i switched off then its change the all settings on default mode.Anybody please help me to slow this issue when you changed ...

...Change the BIOS Jummper pin to Recovery Mode ( without Jummper pin ) 2.Start the computer,Press F2 go to CMOS Setup Screen 3.You See USB Setting Options then Change the Correct Settings & Press F10 ...

change a few settings in BIOS but as long as you can remember what changes you have made so if anything goes wrong you can restore bios to original settings enter BIOS the scroll down to advanced bios

...F9 , it configure with default setting, this command press in all the bios configuration. 2 check with the idu bus,& any pin is broken,R change the IDU bus. 3check in main broad change the idu

...This will let you in by force and that way you can change back what got hosed.. So moving the jumper to clear the BIOS did help? Excellent, please rate me on my solution when you get the

...change the bios settings by using the ARROW KEYS select it press enter and exit then press the F10 key to save to cmos and restartif your not sure or you have made any wrong bios changes you can set ...

...change any BIOS settings Settings including DATE/TIME settings do not remain even after changing them. Its possible the bios battery is not holding its charge. Replace the bios battery on you're MB; ...

...change on saturday march5 If you want to say that "BIOS Password" has been changed, than follow the step to remove the password :- Open PC case Clear the BIOS using "Clear BIOS Jumper setting" or Set ...