HP Compaq Presario F500 F700 and G6000 Motherboard - 442875-001  "scan software trouble scanning" Questions

...trouble scanning using my Dell 922, because my Paintshop has expired. Normally I wait a week until it resets but is there anyway I don't have to do this? Thanks Vicky Hi Vicky, Could you please give ...

...scan a batch to tiff, Captureperfect shuts down. I can reopen it, try again and, BAM, it shuts down. I've uninstalled the drivers, software, and OCR reader software, unhooked the scanner and ...

...scan. Slow performance can be caused by few things...RAM,Programs,Hardware,Ventilation... Now what you need to do is first check if you have installed the RAM according the OS/programs requirement ...

...software. Than run full systems scan. (Just to be safe). You can disable system restarts through system properties/advanced/startup and recovery/settings. Remove the check mark next to automatically ...

...scan the inside of the folder & find the correct driver software & install it. Once completed, restart you're system. If you are going to use a mic you must set that up through windows control panel. ...

...Before you start, you should establish that the utility you end up using will permit regular scans and updates; a standard and necessary feature. Good registry cleaners are a snap to install ...

...scan. What is the name of you're hard drive? (If you say Maxtor), that can be you're problem. I personnaly know alot of people whi have had nothing but weird problems with their Maxtor hard drives. I ...

...software causing startup trouble. Restart the computer and right after start tapping F8 key(its on the top row of keyboard) continuously. You will see advanced boot menu Use up/down key on keyboard ...

...software, surfing the net, if its lying idle and even during boot. U just never know.... The system is 2 years old and I'm facing this problem from about 1 year now. its getting severe by the day. I ...

software/application that you installed "after a couple of days" before the problem resurfaced? This might be the culprit. Alternately, this may be an automatic update issue with your drivers. Perhaps