...CDROM drive, make sure the jumper on the back side of the CDROM is set to "Master". If you have two CDROM drives connected, set one as master & the other to slave. If using an IDE cable for the two ...
...cdrom and restart computer see bootable your computer.. i hope to thankfull to you.. There are 2 ways to reset your cmos i believe one is with the jumpers and the other is to take off the battery if ...
jumper on mainboard : JP10 : 2-3 (normal 100Mhz) SW2 : Ratio-4 SW1 : CPU-100, AGP-66 SDRAM 128MB-PC100 (status new) CDROM 52X-LG HDD 10.2GB, SEAGATE-ATA (Setup windows 98, status nomal) These Problem:
...cdrom you have inserted recently and that has the jumper setting to Master, so that there is a conflict that the motherboard can not solve. Check the labels on disks for setup the jumpers so that the ...
Two CDROM be connected in this Motheboard Can two CDROM be connected in this Motheboard? Is it possible?? Yes, this appears to be a standard motherboard with two IDE channels. Two CD-Rom drives can be
Question about PC Chips Computers & Internet
...happened Try jumper position change, if both CDrom and hadr drive are connected same cable one must be master and second slave, to see exact may be this link usefull or this. If useful then
Question about ASUS Computers & Internet
...you will want to have the Hard Drive connected as Master(Drive 0) on the Primary IDE channel; The CDROM should be connected as Slave(Drive 1) on the Primary IDE channel. Connect the DVDROM as
...that no harddisk detected please help guys. please check the bus whether they r working. if they r working please check the jumper settings in the harddisk and the cdrom. this will solve ur ...
...cdrom is only detected. I have ecs l7vmm2 motherboard attached with 1.6 ghz amd duron, and 2 128 mb pc266 ram, with builtin video. what could be the possible problem and repair for that? Is this the ...
...jumper in HDD and CDrom Set the hard disk jumper to Master Connect the drive using the Master connector on the primary IDE cable. Set the CDD jumper to Slave Connect the drive using the Slave ...
1 questions posted
Usually answered in minutes!
319 Questions
194 Questions
139 Questions
112 Questions