Kenmore 62602 Electric Dryer "replace fuse" Questions

Ad

...fuse. The one on the heater or the one on the lint filter housing? If it was the one on the heater did you replace the thermostat too. Is the dryer vent blocked, has too many elbows, or too long or ...

Ad

...will correct this issue. Replace it along with a new thermal fuse, asap. NOTE_ Make sure the wiring is connected properly and not crossed when installing your new Hi-limit thermostat and new

Ad

Question about Kenmore Dryers

1 Answer

...wires that go to the fuse together and running the dryer. if the dryer heats up when you bypass the fuse then replace the fuse.if it does not heat with the fuse bypassed then replace the heater ...

...Note: It is recommended by most dryer manufacturers to replace a hi-limit thermostat when replacing a thermal fuse. ***If the Thermal fuse is in good conditon, you will need to replace the

...remove the old fuse. 4 Place a new fuse on the housing and replace the hex nut. Reconnect the thermal fuse wires. Replace the dryer's rear panel and plug the dryer back into the electrical

Therma Fuse keeps blowing on my Kenmore dryer (64291) Replaced fuse yesterday and the dryer only worked for a few loads. make sure the replacement fuse is a time delay fuse. the regular fuses will ...

Question about Kenmore Dryers

1 Answer

...fuse. 3. Igniter Igniter may burn out or break. Replace the igniter if found defective. Note: Igniters are very fragile and break easily. It is recommended to handle the igniter only touching the ...

Question about Whirlpool Dryers

1 Answer

the blower wheel is not broken or clogged, and there is nothing blocking the venting. Note: It is recommended by most dryer manufacturers to replace a hi-limit thermostat when replacing a thermal fuse

Question about Kenmore Dryers

1 Answer

...fuse. 3. Igniter Igniter may burn out or break. Replace the igniter if found defective. Note: Igniters are very fragile and break easily. It is recommended to handle the igniter only touching the ...

Question about Kenmore Dryers

1 Answer

to your dryer. set the screw aside and discard the broken thermal fuse. replace the thermal fuse screw to attach the new replacement thermal fuse to your dryer. reconnect the wires to the thermal fuse

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

836 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...