Kenmore 62602 Electric Dryer "heats shuts error code" Questions

Ad

Question about Frigidaire Dryers

1 Answer

...shuts down, i did the test and get error codes FDL AND R11. I Replaced the igniter since it was broken and in bad shape but that didnt get it to heat up again, continues to shut down and no heat. ...

Ad

Question about Frigidaire Dryers

1 Answer

error code Dryer does not heat Ad flashing code Good Morning Friend, I understand that you are receiving an "AD" error code on your Frigidaire dryer, model# AGQ7000E. I also see that your dryer is not

Ad

error code E14 is displayed. When this condition occurs, the gas valve is shut off and the ignition control must be reset manually. Resetting Open the operating panel and press the gas reset button on

Question about Electrolux Dryers

1 Answer

...error code My dryer will run for about 5 minutes, but will not heat up. Then it will shut off and the cycle lights flash. I ran the diagnostic cycle and got error codes E5b and 006. I pulled the ...

error code on your Frigidaire dryer, model# GLEQ2152ES0. I also see that your dryer is not heating. The "AD" code states that your appliance is in an auto dry cycle. I suggest resetting your dryer, by

Question about Whirlpool Dryers

1 Answer

...shuts after one minute error code f22. unit runs and heats for about a minutes. I believe the unit was plugged into outlet with only one leg of 110volt supply getting from cir br If it heats then ...

Question about Whirlpool Dryers

1 Answer

error f 22 the dryer starts and after 2 to 3 minutes stops showing the code in question. There is a bit of heat but I think cause it does not run long enough to creat heat. It could be the thermistor,

Question about Frigidaire Dryers

1 Answer

...shuts down after about 5 minutes and won't heat up. It didn't show an error code. I tried it on a timed dry and it ran the whole time but didn't heat up. It's also running louder when it does run. ...

Question about Electrolux Dryers

1 Answer

...Error code E64 means Heater Open Circuit. This error appears when the Heating element or wiring to the heating element is defective. To clear the error code (s): Press and hold the far left key under ...

...shuts off after about 10 minutes. 4 lights on right flash. no error code comes on. I am pretty handy and can take apart and fix. would need to know what t frigidare dryer gleq215ee won't heat ...

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

836 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...