Kenmore 62602 Electric Dryer "279769 thermal" Questions

Ad

Question about Roper Dryers

1 Answer

...thermal cut out is 279769 check for 220 volts at element if you have it the element is bad if not the thermal cut out is bad ... got both of them on sale at whirlpoolpartssurplus.com most people just ...

Ad

Question about Whirlpool Dryers

1 Answer

...just don't get dry, all the sounds are the same and the cycle seems to be working. most likely the thermal fuse 279769 or the heating element 279838 if this is a newer ...

Ad

Question about Kenmore Dryers

1 Answer

...Thermal Fuse Kit 279769 for Whirlpool. AND RESOLVED HE PROBLEM. ABOUT A MONTH AND DRIER FOR DRYING LEAVES. IS THE CHANGE AGAIN AND AGAIN month leave from work. I need to know the model n serial# to ...

...Thermal Cutoff kit'' with the part number 279769. The spade connector seems too large on one side. The red wire in my dryer has a lager connector than the white wire. Did I get the wrong part or am I ...

...thermal cut-off . This piece , is a small thermostat looking piece , located ( from the front ) farthest back , on the element housing ( containing the element ) , with 2 wires going to it . Pt # ...

...thermal cut-off fuse (part #3398671 or substitution part #279769) after running for about 5 minutes. I have checked the high limit thermostat (part #3390291) located on the heater element housing for ...

...on and operating,just no heat:( very common, you either have a bad heating element or thermal cut out the heating element part number is 3387747 thermal kit # is 279769 whirlpoolpartssurplus.com ...

Question about Whirlpool Dryers

1 Answer

...thermal cutoff part #279769 Hi, If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working ...

Question about Kenmore Dryers

1 Answer

...279769 If thermal is good, check the heating element for continuity. Remove red wire from element and check across ELEMENT terminals. No continuity? Replace element pn 4391960 Both problems are ...

...Thermal Cutoff Kit 279769 I have a Kenmore Series 80 110.62842100 and the thermal cutoff went bad. I bought Kit 279769 that has the cutoff and the hi limit thermostat. I replaced the TC and the dryer ...

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

836 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...