Genie Company IntelliCode GICT390-1BL Remote Control "pry open" Questions

...pry it open. Start prying at the bottom of the remote, near the battery compartment and then the edges. Use delicate force and try a small step at a time. Once you have pryed open the bottom end, ...

...and peeling the edges. There may be catches along the side. Use a old credit card to pry it open. Caveat if you use a metal screw driver it may damage the plastic when you apply force to pry it

...I looked at the answers you gave about clean ing it. The problem with my remote, there are no screws. it pops apart,you need to pry it open Some remote are in a snap-together case that pries

...pry open. thx!!! Most of these control units are friction fit together with tabs and detents. You should be able to pry it open with a thin knife blade. Please be careful and only apply pressure away ...

...batteries first=====the suggestion already posted is correct--they must carefully if no screws be pryed apart to examine and or clean inside.They are snapped together and when prying you are trying ...

pry open CAREFULLY but pressing side cover joints for hook to be pushed in with gentle pressure. you may have to use two flat screw drivers to pry open side. This may or may not work depending on what

pry open somewhere and not entirely sure where. I'm trying to fix this on my own as the remote is discontinued and the only ones I'm finding available are in Korean. Most remotes or at least many snap

...open. I used a small strong knife and worked it between the two halves of the remote. Once you have done it once it becomes easy. Use a small flat blade (screwdriver, or whatever) and pry around the ...

...together with small latches that are inside. You have to carefully pry open with a knife or small flat screw driver taking care not to damage the latches. If it is working fine I would leave it

How I can open the back of the control? I can not open the control back where the batteries are placed. you may have to pry open with a sharp knife .