Kenmore 47702 / 47704 / 47709 Electric Single Oven "gas oven low flame" Questions

...in bottom oven If the flame stays low from the beginning then it will be the flame safety device (fsd) not opening on sensing the flame and will require replacement by a gas certified

...gas oven repair man good luck I need a someone to fix my oven gas stay at a low level if when I turn the oven up all the other burners and grill works fine need a engineer in the NW10 area help wife ...

...gas oven/stove over from propane to natural gas. I changed the orifices for the stove top and switched the regulator cap from propane to the natural gas position. The stove top burners work great but ...

...gas oven on turning the oven on the flame is very low and will not boost up call your gas provider as they usually have a free service whereby someone will come to your home to check out and fix your ...

...gas oven not heating My oven is not heating. The gas flow is so low that a match won't enable it to stay lit. The stove works fine. Sometimes the oven will heat, but have to keep turing off and on, ...

...gas oven won't turn on, the first thing to do is check the power source. Most modern gas ovens are electrically powered. Check to make sure the oven is plugged in and the breaker isn't tripped. Check ...

...a heating element in the box causes a small valve to open allowing a larger amount of gas into the oven burner to ignite the whole burner If you can only get pilot flame on high replace this ...

...gas oven will not clean or come on The oven was hard to light but would clean. Eventualy the oven would not come on all the time. Now the oven completely fails to function. Hi, There are possibly 2 ...

...Gas Oven (790) over to LP from Natural Gas. I inverted the little plunger in the thermostat for LP, adjusted the burner orifice spud and adjusted the Air Adjustment Shutter as per instruction in the ...

...gas powered is on, the oven may be starved for gas. just had the same problem. Went through all basic solutions. ultimately found thermocouple capillary overheating and stopping MV output. Rerouted ...