Question about 1A Auto Parts Vehicle Parts & Accessories
humming noise coming from temp sensor above diver door senor is humming unsure if you have a sensor in that location, more likely a cell phone speaker in behind the headlining
Question about 1A Auto Parts Vehicle Parts & Accessories
I hear a metal on metal noise coming from the driver's side front wheel that will come and go. I thought it was the disc brake retainer clips rubbing on the disc so I changed them out and put new ...
Question about 1A Auto Parts Vehicle Parts & Accessories
...my truck. Your 4 wheel drive works off of a vacuum, so check all the vacuum lines going to your front transfer case and see if one of them is unplugged. Try another mechanic if you don't get good ...
fuse box diagram Key chime and some panel, steering wheel lights are not working Here ya go
Question about 1A Auto Parts Vehicle Parts & Accessories
diagram of a 4 wheel drive Silverado 2008 will not go into 4 wheel drive The easiest way is to go to a parts store. They will print off one specifically for your vehicle.
Question about 1A Auto Parts Vehicle Parts & Accessories
How I unlock my 4 wheel drive low back to 2hi on a 98 Yukon push button? I tryed driving backward and forwards. I tryed parked nutrel and drive. Nothing seems to work. these truck have a 4wd actuator ...
reduce power chevy trucks I have a 2008 6.3 litre,it runs for a minute,give or take,then shuts down,then reads reduced engine power fuel pump could be getting weak.
Question about 1A Auto Parts Vehicle Parts & Accessories
where do you plug in the code reader Drivers side left side of steering wheel under dash you should see a black multi pin plug that will be your ob1 data port for code reader.
Question about Timken Vehicle Parts & Accessories
...front wheel bearing in a Ford expedition 1999 2 Wheel The bearings are part of the wheel hub assembly. All you need to do is take the wheel off, remove the brake caliper and pull off the wheel hub. ...
Question about Timken Vehicle Parts & Accessories
...assembly with Timkin SP450301 , But the center of the new bearing is not snug into the center hole of steering spindel . Is this OK as long as the three bolts line up and screw in tightly? It should ...
3 questions posted
Usually answered in minutes!
37 Questions
9 Questions