Kenmore 30464 / 30465 / 30469 Gas Single Oven "unlock oven cleaning error" Questions

...oven door won't unlock after the cleaning cycle was done. gets error code -f5- I took the back off the stove and manually moved the door locking mechanism to unlock the door. Then started a cleaning ...

...any time: Press UPPER/OFF, LOWER/OFF or OFF/CANCEL. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools." Has your oven had time to

...Oven will not unlock. My Amana Oven - AOCS304OSS EvenAir Convection Plus - Electric Wall Oven will not unlock. I set the oven to clean, but needed to cancel real quick...once canceled a ...

oven door will not unlock Kenmore 164D2773PO49 oven door will not unlock. Hello,, Some times this will happen after a self clean cycle if the timer did not finish the entire clean. Try to set the ...

...oven at which time it needs to cool off for at least an hour before unlocking. If the error message comes back on, either re-set the breaker again or wait until the oven cools down enough to

...unlock that oven.. http://www.fixya.com/support/r3969401-self_cleaning_oven_problem heatman101 Asker's Testimonial " Wish I had read this first. I never would have used the self cleaning option. ...

...oven door would not unlock replaced display panel F3 error fan runs constantly lower unit still works upper unit still will not unlock F3 or F4 Shorted or open oven temperature sensor (RTD) Check ...

locked. can't unlock. First, Disconnect the power from the oven and let it sit for at least a few minutes. Then reconnect the power and see if it unlocks. If not you may need an oven latch replacement

...It will not unlock until the oven cools. I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question. take the time to rate us.Thanks and good ...

...unlock. I powered the oven down and back up. Upon power up I got a F13 error message. How can I get the door unlocked? Is the thermocouple cooked? press clear for five seconds if that doesn't work ...