Heath Zenith Occupancy Motion Sensor Wall Switch - White, SL-6107-WH "stays" Questions

Motions don't stay active when doors and windows are on too. Press doors and windows and motions, but motions don't stay active. After I activate both doors and windows and motions, the motions don't ...

...Never had it do this before. have turned off the switch and reset to 1 min vs 5 min, and it still stays on. any suggestions? Here goes......First of all I Have the wireless model sensor.....I

cannot get light to go on and then off at programmed time. Stays on. At cottage with no neighbours or ambient light. Installed professionally, not by myself. Frustrated many efforts before contacting ...

Light stays on How do I work it so it does not stay on make and model? Did you read the instructions. There's a lux setting on the sensor turn it down a little also there is a timer setting make sure ...

GE Simon XT panel lights window, door and motion indicators I have the Simon XT and each time I arm the window and doors with the panel button and then push the motion button the light on the motion ...

...very similar. I have 4 and one will only take 2 or 3 pics then the battery low light comes on and stays on. 2 of the others get more pics, but batteries are lasting about 7 to 10 days and then the ...

dropcam pro hd will not stay on now that the recording trial is done camera was working fine until the recording option trial ran out, then the HD setting would not stay ON - I had to uninstall the ...

Light stays on on motion security light If you click the power to it on and off and on again, they stay in permanently. On a fixed installation, the sensitivity is set too high. Or it is faulty. There

Can the Simon xt be programed so that when you enter the stay mode there is not exit delay beeps? I would like to be able to set the alarm in the stay mode without an exit delay occuring. There is ...

garage door opens only 2/3 and won't stay closed The garage door will open only 2/3 and will not stay closed. We have tried the ajustments on the side of the opener but it's not fixing the