Sony KDF-E50A11E TV "flashing codes 6" Questions

Ad

Question about Sony Televison & Video

1 Answer

green timer light blinks and then lamp light blinks.. tv will not start up. You probably need a lamp. Check the code by holding menu and input for 5 sec. If you need a lamp the led will flash 6 times ...

Ad

Question about Panasonic Televison & Video

1 Answer

...6 times and tv won't turn on panasonic pt-53x54 won't turn on red led light flashing Hi friend,,,,,, it is an indication of an error code ,,,,,,normally 6 blinking code refers to an power set up ...

Ad

...blinking lights. thermal fuse tested and working. wh thermal fuse and bulb are good. still getting code of 6 flashing red power light. what else would cause this code Brand and model would be

Question about LG Televison & Video

2 Answers

6 Press STANDBY, and your TV should turn off. If it doesn't, switch off, press TV, then press the STANDBY button. Repeat this (press TV, then STANDBY) until your TV turns off, then press SELECT. NOTE:

Question about Sony Televison & Video

1 Answer

flashing 6 times green, then flashing 6 times red (6 red etc), means you need to replace part number A-1302-272A G1 BOARD, COMPLETE. See Sony Service Manual, 4. Chasis-1 at part Ref no. 103. The Power

Question about Sony Televison & Video

1 Answer

kfwe50a1 will not start, green light comes on and then flashes red 6 times Hi Keith,6 flashes of the led light is an error code and the unit will not fire-up unless isolated the faulty parts.To ...

Mitsubishi VS-50705, 50 inch Rear projection TV won't turn on! Hi, the tv was working fine & it has barely been used since '99. I haven't used it in forever. I plugged it into the wall outlet & it won

Question about Sony Televison & Video

2 Answers

...codes on car flashing the check engine light. It may blink like 6 times successively then pause, then blink 6 more then repeat, this is a code 6, the codes will give some Idea of what is wrong (P.S. ...

...6 red flashing lights. THE CODE FOR 6 RED FLASHES IS YOUR THERMAL FUSE ITS LOCATED ON YOUR FAN HOUSEING FOR YOUR LAMP WHEN YOU FIND THE FUSE USE A JUMPER OR JUST TWIST THE BARE WIRES FOR THE FUSE ...

codes - it says that the 6 flashes means a power error. What could be causing this error? Thank You! I would talk to whoever rebuilt the optical block and see if they have any suggestions. It could be

Not finding what you are looking for?
Sony KDF-E50A11E TV Logo

28 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...