Insignia NS-L26Q-10A 26 in. LCD TV "source selection auto channel scan" Questions

AUTO SCAN, If when You scan, and you don't get at least one channel, it will keep showing You this message! look at screen it will show new channels! if no new channels check to make sure your coax is

Signal Source - ANTENNA or CABLE. 2) Go into the menu for channel source and select the input you are using. 3) Go into the menu and SCAN/auto program all the channels. You can now select your station

...the TV menu for signal source and select the same as what you connected (Antenna or Cable). Go to the auto program/scan menu and start it. This may take a few minutes. Now you may watch the

Auto Scan. I put it on DTV using the Source button and then hit menu. When I go to DTV nothing shows up so I have no DTV menu. Any Help? Reset the TV to the factory default settings then reconnect the

...auto add the ones that get reception say if ur using an antena if u are trying to hook up a cable box or sat box through the antena coail wire at the same time u can not have them on so to scan for ...

CABLE. 2) Go into the Channel/Signal menu on your set and select signal source. 3) Go to SCAN or auto program and SCAN in all channels. Now the set will work by selecting the channel you want to watch

...the TV Menu and select the same signal source you connected to the back.(Antenna or Cable) 3) Go to the auto program/scan menu and run it. This may take a few minutes. Now the channels may be

Auto & Manual Scan greyed out cannot be selected I have selected the source as TV but still do not allow me to select it. I cannot set the channels. My TV have the following options on source, TV, AV1

...Auto Program will scan for available channels from the signal source directly connected to the TV's CABLE/ANTENNA input and may take sometime to complete the process. Follow the help text provided on ...