LG 47LH55 47 in. LCD HDTV "radio red flashing light turns" Questions

...Radio Shack $6.00). If problem not solved, then you have a tech look at it. Had the same problem - green light on for 2 seconds, then red light flashing 6 times over and over. Since I don't know ...

...red light. Check your manual that came with the tv. You can try resetting by usually unplugging a few minutes, then plug in and hold the power button on for a few seconds when you turn it back on. ...

red to green but the TV does not come on. None of the switches on the TV work and the remote doesn't work either. Have disconnected power and reconnected with no results. Have changed batteries in the

...red light at bottom right hand side of screen just flashes? The capacitors in the power supply are bad. Take the back off, look at the capacitors, "barrels", if the top is bulging up, they are bad. ...

...red light. Most failures on this LCD are due to defective capacitors in the power supply board. The defective capacitors are 1000uF/16v, the reference designators are EC18, EC19 & EC20 and since ...

...red and flashing constantly). I did some research and found out the the power board is faulty. I ordered a DIY fix it kit on Ebay for around $55 (includes shipping). The kit contains 5 high temp ...

...red lights on the front. I found out that is a code 12. I took it apart expecting to find bulging capacitors, but was stumped when everything looked fine on the powerboard. After seeing a posting on ...

Radio Shack. Bought three different capacitors, mine was 1000uf 35wvdc 85+, a solder kit, and a desoldering vacuum tool. My soldering wasn't the best, actually the worst I have ever seen but I figured

...radio shack 15-309 remote please help Hello I've got one four digit code for Vizio. Try it with. 0081 Direct Code EntryPress and hold the SETUP button until the red indicator stays on, then release ...

red light continues flashing I see so many here with no sound/no picture issues: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check main fuse, standby power supply and any signs