Sony Bravia KDL-26L5000 26 in. LCD HDTV "digikey remote" Questions

...remote receiver board. You will havwe to open up the TV to check or have the repair person fix the problem. Basic LCD monitor and TV troubleshooting guide: ...

...remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the ...

...remote may just be almost dead. Clean the Plexiglas in front of the infrared receiver on the TV. It may have bad IR receiver board located on the front of the TV, or worst case will be the main board ...

...remote control so i changed them. That didn't work so I went up to the screen to turn it on and it wouldn't work. Outlet is OK? Check the power supply module, connections, look for any blown parts, ...

...remote IR board is received, it will send out the PS_ON signal (3.3v~5vdc) to the power supply to turn on the rest of the power supply. Are you saying that it HAS 0VDC for the PS_ON signal? Please ...

...remote buttons, and unplugged the set and also did factory reset Did u go into the tv menu and go to Video Setting and go down to do a resetting to the whole Tuner signal board resetting for factory ...

...remote control, press and hold either the RESET or UP ARROW button. While holding the RESET or UP ARROW button, press and release the POWER button on the front of the TV. NOTE: The TV will turn off ...

...Remote input jack. Otherwise it may have problem with the IR receiver board. Basic LCD monitor and TV troubleshooting guide: ...

...remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the ...

...remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the ...