Kenmore 79012 / 79014 / 79019 Gas Kitchen Range "range element popping" Questions

...range broiler element popped and burnt amana electric range art6002w - broiler element popped and burnt; replaced but broiler does not work; bake element works and display clock and timer work. why ...

FRIDGIDAIRE RANGE Electric 220V - oven was running heard a large pop and tripped a circuit breaker. I reset the breaker and everything on the range works except the oven and broiler elements. Elements

...range top works but only light on panel that come on is "element on" Sounds like your element wire shorted out on back of unit.Try removing back panel and cheak wire on bake element .MAKE SURE YOU ...

oven coils not heating after loud pop sound Sometimes food gets on a element. This causes a hotspot. The element makes a pop and goes bye bye. Remember this. When checking or replacing oven elements ...

Oven shuts off I replaced the heating element in the oven which is an Electrolux. After turning the power back on the stove appeared to work. I set the clock, then turned on the oven. As I began to ...

The oven was on and I was baking. Heard a 'pop' then the oven went off. I flipped the stove breaker on my electrical board back on and it took the whole power to my house out. Flipped the stove ...

...element. Took it apart so long ago, can't remember how to put it back together! There is a metal plate that appears to be a heat guard of some sort that should go on the back of the range to protect ...

...element in the lower oven of our Jennaire Dual Fuel range and when I put it in and truned on the oven it pop the breaker. I pulled it out and checked over the connections everything looked good so I ...

...element kinda of blow out on the range of a RB757BH1WH Hotpoint range. There was a big zap and pop sound and a hole in the bottom of my stock pot. I have gotten a new element and replace the old. ...

...range; broiler element popped and was then burning and sparking as if being welded. Turned off control knob but element kept burning. Turned off circuit breaker and element stopped burning. Besides ...