DISH Network VIP211k HD "receiver" Questions

Dual control noted on Dish tv screen but cannot change stations separately on both tvs Each TV receiver has to be fed with a separate cable from the lnb. They can not be bridges or split. TV 2 (the ...

my receiver does not send hd signel to tv no hd out put are you getting a picture or show? if so is the show your trying to watch benning brodcasted in hd What branch, change this box with your ...

my dream gear galaxia controller won't turn on I turn it on it blinks and goes off with the receiver plugged in your power supply is toast

receiver manual I am looking for the manual for Satellite reciever the Prodigy 2 please - [email protected] Kbox Prodigy user Manual ZetaSat com

how to install ant105 ? Installed after receiving some tine ago and did not work. Removed ,again trying. Needed the wire connection- directions to try again.Send to this address: [email protected]

My out door TV antenna stopped receiving 1 of 8 channels, this station is 20 miles away, the station said they weren't having any problems transmitting, do I need to replace the ohms device? My out ...

my antenna won't rotate and I now receive only local channels There could be a problem with the wires going from the control box to the rotator, or the remote itself Good luck, Marty

How do I get a signal from my Jack OA8200 digital tv antenna. I used to get a signal to the TV but it suddenly stopped the SureLock Signal Meter is getting power but it does not receive a signal. The ...

...FX-50, 6 meter fm amateur transceiver that I built a few years ago. The transmitter works but the receiver is now inop. Any suggestions? Check to see if there are any cold solder joints in the ...

just bought a digital antenna and can only get 3 channels what can i do to correct this problem we have hooked it up the way it said but will only get 3 channels and want to be able to receive more if