work fine. check the burner socket, it is likely that contact is being lost where the burner connects to the hardwired portion of the system (the socket). It is not unusual for the socket to "burn up"
work, it is possible that the burners have become dirty or wet. Please follow the troubleshooting directions below before calling service: Turn you burner to the Lite position: If you hear clicking or
...burner does not work the front left burner indicator light stays on even when knob is in the off position. the burner does not work at all now. all 3 other burners and oven work fine. Replace the ...
Question about Thermador Kitchen Ranges
...gas getting to the burner. The other burners work well. Take the bad one out and one that you know works. Compare them to see if the tube is clear and the air shutters are adjusted the same ...
...burner location and it worked. I flipped up the top and I replaced the wiring and the receptacle and it still did not work. Do you guys have any suggestions? Thanks for any assistance. its probally ...
Question about GE Kitchen Ranges
...burner will not work. Any answers or suggestions on how to troubleshoot this problem would be greatly appreciated. the bridge burner is 99 percent chance that it is blown. turn the power off and take ...
Question about Kitchen Ranges
I have a GE Eterna Self-Cleaning Gas Range. the surface burners work but the oven does not. I checked the oven gas valve and ensured it is on. It still does not work. The upper burners (stove surface ...
...burner still work and so does the selecter switch but they do not glow as brightly (fire red) as the other three burners. It now takes twice as long to boil water with the right front burner. Is this ...
...on when the knob is turned on. All the other burners work fine. Your help is much appreciated. Thank you, Garrin I would try replacing switch for that burner. But it also could be a defective
64 questions posted
Usually answered in minutes!
395 Questions
185 Questions
149 Questions
93 Questions
67 Questions