Olympia Standard 300 Typewriter "mar rel" Questions

...mar. rel. key, space to where you want the mar. press the rt. mar. key. DickyO I don't know what I did but I held down the MAR REL button and physcally moved the cursor by hand back and forth. ...

...mar rel. Space to the location thayou want th R. mar and press right mar key, if it stops at the R. mar. press and release the mar rel key. To clear tabs tab to the one you want cleared and press tab ...

...MAR REL. turn typ. on press the return key then press the MAR REL key back space to move the carrier backwards or space bar to go forwords. when you are at the spot you need to be fined the button ...

...Go to the margin you wish to reset, Press mar rel key (some say MAR REL some just have two vertical lines and arrows), Space or backspace to desired location, press the L. or R. margin key. ...

...MAR REL or Be 2 vertical lines with arrows or a key with mar rel printed above it that requires the use of the code key. When you stop press MAR REL space to desired R. margin mlocation press R. ...

...mar rel key, space to desired location, press R. margin key Return to the L. margin, touch the mar rel key top key on L. of the keyboard, backspace to location where you want the L. margin, touch the ...

...MAR REL key and use the SPACEBAR or BACKSPACE KEY to move the carrier to where you want it. If the L MAR and R MAR (and MAR REL) is printed on the case, hold the code button down and push the key ...

...hit the 'mar rel' key and use the spacebar or backspace key to position the printhead. some machines don't have a "mar rel" key and on these machines just using the space and back sp. keys will do

...I can find a manual, hopefully free? Go to the R. mar, press don't bhold mar. rel. key, space to desired to desired position. press R. mar. key.. On some models the R. MAR. key id CODE L. MAR. ...

...mar rel keys" and backspace to where i want it, same thing for right but it didn't work. Do you have any other suggestions? I need to reset the left and right margins, i had read to press "code" and ...