Question about Brother Office Equipment & Supplies
...daisy wheel. Does it looked roughed up a little? I just had this same error and discovered that my daisy wheel was hitting my tape when spinning and not allowing it to jump characters like it needed ...
Question about Brother Office Equipment & Supplies
...daisy wheel to type correct letters I dropped my GX-6750 Brother typewriter and cannot get daisy wheel to line up correctly. I have tried code and reset and looked for the switch on the inside right ...
daisy wheel gets in crooked. Also, there is a little post that a hole in the daisy lines up. When was the last time the machine had a good cleaning? There are some position sensors that could be dirty
...Daisy Wheel for a AX550 word processor and have not had any luck in stores or on line. Can you tell me if this is a line which is no longer available or if I can still get one?r We have used ones in ...
line up daisy wheel If you aren't in a language mode or in KBII the printwheel homing pawl is probably broken. You need a tech. DickyO
How can I adjust Daisy Wheel Electronic Disctionary Typewriter so I can see the line it is printing on? You failed to give a model but the ribbon may be improperly installed and to high. DickyO
Question about Brother Office Equipment & Supplies
Daisy wheel seems to be typing wrong characters. Is there a correct orientation for the wheel the typewriter? thanks Anne in Espanola Brother sx4000 type "code" and "reset" it will reprogram itself ...
...daisy wheel and line it up remove the ribbon to see better. Their is a latch right by the print wheel. Just pull gently toward you and the printwheel holder will pop open. Then lift the wheel out and ...
Question about Lexmark Office Equipment & Supplies
...daisy wheel. The only wat to remove the label was to remove the roller. I did that and replaced the roller. Now the daisy wheel is only printing part of the character. is there an adjustment I can ...
Question about Office Equipment & Supplies
...daisy wheel will not line up properly First I would remove and inspect the daisy wheel for bent spokes. If that looks ok there may be a problem with the selection plate assembly, but it would take a ...
179 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions