Brother ML-300 Typewriter "aligning daisy print wheel" Questions

...print incorrect characters. Try these steps: 1) Open the Top Cover. There is a lever directly behind the Daisy Wheel. Pull the lever back towards you. Remove the Daisy Wheel by pulling it up and out. ...

...Daisy wheel is not aligned with the striker, it is two characters off. How do I fix this alignment?? 1) Move the print carrier to the center of the platen using the SPACE and back arrow. 2) You will ...

...the hammer Opened up and removed the daisy wheel and looked at the hammer but don't know what to touch to re align it again It is more likely that the print wheel has bent or broken spokes. ...

daisy wheel to align From the manual of Sr Smith Corona WordSmith 100: Changing The Print Wheel 1) Move the print carrier to the center of the platen using the SPACE or BS key. 2) You will see a lever

...daisy wheel properly inserted so it will print what I type, can you help? typing "code" and "reset" sets it right to type there is a release lever on the right side of ribbon carriage, release, then ...

...print wheel cartridge. Lightly rotate it to see if it will move and reinsert the cartridge. snap it back into place. Turn on the machine, the typewriter should move the carrier to the left and reset ...

print hammer not in alignment with daisy wheel and it wont print .is there an adjusment i can make? I have turned the typewriter on and off and it still is not printing the correct letters.

...print carrier to the center of the platen using the SPACE or BS key. 2) You will see a lever on the right side of the carrier. Pull this lever toward you and lift out the daisy wheel. 3) Place the ...

Print Wheel Drive Gear is out of Position How do I get to the correct position? Many thanks? Power up the machine, the "V" groove of the hammer should be center aligned with the "." petal If not 1 ...

...daisy wheel is out of alignment and types different characters on typewriter. If you are not in KBII, proportional space or a language mode the print wheel homing pawl is broken, you need a tech. ...