Brother FAX-575 Plain Paper Thermal "brothers cover open" Questions

...open front cover, press the "options" button, you should see "replace drum?" press the "start" key then 1 then 0. display should show accepted for a couple of secs. then show cover open. close front ...

...open cover The problem: The cover is already closed. If I open the cover and then close it completely the same message comes out. So I'm not receiving my faxes. Pls open cover = Please open cover. ...

...cover open when the cover appears closed. Make sure the covers are completely closed. Open each section an close it making sure it closes with a click. Also check for covers under other covers. Hope ...

...COVER OPEN" message Hello, This is the manufacter's official manual link: http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_IntelliFax_750_770_EN_85.PDF On page 63 it shows you how ...

...Open cover "ONLINE' I have brother Intellifax 4100 with this error PLS OPEN COVER ONLINE not sure if solved here is the manual ...

...reads back cover open because the piece of paper is covering the sensor for the back cover. 1.Just check if you closed well your cover 2.Or check the sensor of cover may be is covered by paper or ...

...4100 1. Open the front cover. 2. Press the "CLR" buttone. 3. Press 1 to reset. Done. 1- Open the front cover. 2- Press the Options button on the panel 3- Press 1 to reset and close cover it's done

open front cover with the machine on and press the options key.message will appear replace drum unit then select 1 for new.close cover Hi, I had the same problem with this machine. After going through

...on the display), and then 1 for Yes. Wait for "Accepted" message and close cover. It may be necessary to remove the drum unit and put it back in, and then, with the cover open, do the a/m