Brother IntelliFax-2820 Laser Fax "toner sensor" Questions

Ad

Question about Office Equipment & Supplies

3 Answers

...toner sensor. E000024-0001 is development unit toner full. so what u have to do is check the toner sensor at the back of the toner tank, after u take out the paper output tray, then u will see the ...

Ad

Question about Copystar Office Equipment & Supplies

1 Answer

...Toner sensor problem ? The sensor output voltage is outside the range of 0.5 to 4.5 V during toner control. ? The toner sensor control voltage cannot be set within the setting range when maintenance ...

Ad

Question about Panasonic Office Equipment & Supplies

1 Answer

...Lift up the chrome piece that hold the toner sensor...it's a small black button. Put a strip of 1/4" X 2" weatherstripping foam underneath. The sensor is not close enough to the toner

Question about Panasonic Office Equipment & Supplies

1 Answer

...toner. The photo sensor does not detect the toner en the fax is new. Put a black tape where the toner slots into the sensor en walla it worked. When the copies become faint I know that the toner is ...

Question about Kyocera Office Equipment & Supplies

1 Answer

...Toner sensor problem • The sensor output voltage is outside the range of 0.5 to 4.5 V during toner control. • The toner sensor control voltage cannot be set within the setting range when maintenance ...

Question about Panasonic Office Equipment & Supplies

1 Answer

toner sensor, but seemed to think I could change the setting to allow the fax machine to continue to receive even after the sensor said it was empty. We would just have to watch to see if the received

Question about Canon Office Equipment & Supplies

1 Answer

toner supply sensor).Fix open front cover remove waste toner container by releasing blue locking lever on the right.(point of consideration, when removing waste toner container be careful not to shake

Question about NEC Office Equipment & Supplies

2 Answers

...sensor for the reservoir, it shows toner low. 2. Take the toner out and shake it hard about 10 times, this will make any settled toner loose, and should solve this. The problem is normally caused by ...

Question about Office Equipment & Supplies

1 Answer

sensor could be dirty. Also make sure it is not a generic toner, some people have had problems in the past with generic toner bottles, also if you have had the back cover off the machine make sure the

Question about Brother Office Equipment & Supplies

1 Answer

...sensor in the printer with toner dust. then you throw it away. 2) Disassembling and scrubbing down the printer is slow but works pretty well. 3) Spraying an alcohol based spray cleaner around the ...

Not finding what you are looking for?
Brother IntelliFax-2820 Laser Fax Logo

993 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...