replacing needles on pfaff 788 serger I am replacing both needles on my 788 Pfaff serger and need to know if both needles are even after replacing meaning needle A is shorter than needle B. Thanks! No
...the needle(s) you wish to change. Replace with new needle and tighten into position with small screwdriver. Then simply replace the needle shank with the red marking facing the front (towards
Question about Sewing Machines
...needle and tried to replace both needles. Now I can't get my machine to chain. I have rethreaded it, and replaced the needles, closely following the manual and threading guide but still I broke a ...
...Replace needle. Threader hook bent - Replace with new needle threader hook. Hope this helps. Read more from the link I attatched. Good luck & have a nice day! Automatic needle threader will not ...
Question about Brother Sewing Machines
...replace needle5.needle not all the way up in needle holder--loosen needle clamp screw & push the needle up until it stops then tighten screw6.incorrect threading--one step missed in sequence of ...
Replace needle on a Huskylock 905 Need to remove broken left needle and replace with new one Look in your owner's manual for needle replacement procedure. You have to unscrew the small screw holding ...
...Replace needle and don't pull the material. Let the foot do the work. The needle is most likely bent. Replace it immediately with a brand new needle. If the needle continues to hit the needle plate, ...
needle out, replace with a new needle and tighten, Just remember, if you don't have the needle in properly you will ave issues. Usually, the flat part of the needle goes to the right, I have a brother
...replace with a brand new needle. Also, be sure to use needles that are compatible with the thread and fabric, ie ball point needles for knits, sharps for woven fabrics...) FWIW, needles are the least ...
The needles can be replaced but need to be secured by riveting and or epoxy glue. Most often the needle plate is cracked and neither of above will hold to do it right. Replace the entire needle plate
46 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions