Brother XL-5340 Mechanical Sewing Machine "thread jammed" Questions

Ad

Question about Brother Sewing Machines

1 Answer

...knife, horizontally, to slice through the jammed thread. The bobbin should be removed after this, and ALL traces of thread removed from all areas. Then, re-thread, re-insert bobbin, and try

Ad

...avail. The fabric will not feed through, and jams, and when I look under the plate, there is jammed globs of thread. The bobbin seems to be ok. It's the top thread. What make and model sewing

Ad

Question about Husqvarna Sewing Machines

1 Answer

sewing machine jams my upper thread keeps knotting up, jamming the machine. how do i fix this? does it jam up on the top or bottom?? if it shows on top it is the bottom thread if it jams on the bottom

Question about Brother Sewing Machines

1 Answer

...thread jammed. machine was working fine when suddenly it just jammed up. Everything seems to be fine, but the balance wheel is completely jammed rigid. I've looked at the shuttle and there are no ...

Question about Singer Sewing Machines

1 Answer

the thread jams in the hook area. I've removed it according to the manual and it still jams. change the needle clean under the needle plate where the feed dogs are for lint clean the bobbin are for ...

Question about PfaFF Sewing Machines

1 Answer

...thread is jammed in the bobbin compartment. it broke off and i can't get it, can't really see it, but my entire machine is now jammed. i'm desperate. You can remove the thread jam by moving the hand ...

Question about Baby Lock Sewing Machines

2 Answers

...thread was jammed. I took it apart but never found a thread jam. I oiled it and tenderly put it back together. I worked for about an hour more (quilting) then jammed up again. Can't even turn the ...

...thread is jammed somewhere. However when I look there is not thread jam. a part of the computer is malfuctioning, & needs to be checkedtry a new needlerethread the machine using every thread ...

How do I stop my unbranded FHSM 505A sewing machine to stop jamming? Bobbin thread is snagging after 4 or 5 stitches. "jamming" Is typical when bobbin thread has escaped the case tension spring. Are ...

thread jamming between thread spool and needle believe it si jamming somewhere between the thread spool and the take-up lever. will run for about 5cm then jams. thread is split when pulled free. check

Not finding what you are looking for?
Brother XL-5340 Mechanical Sewing Machine Logo

97 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...