Brother PE-150V Computerized Sewing Machine "pick lower thread" Questions

...pick up lower thread the machine was working just fine till I adjusted the thread density button, now it will not embroidery at all. I have changed the needle , thread and even the bobben thread and ...

pick up the bobbin thread. I have cleaned the race and bobbin area well. When I put the regular foot back on and raise the feed dogs again, everything is fine and the lower bobbin is working properly.

...without noticing. I cleared the jam, re-thread the machine and now the upper thread won't pick the lower thread. It looks like the upper thread isn't even going down there! adjust needle lower it ...

...lower the needle to pick up the bobbin thread, it lowers but doesn't pick up the bobbin thread... I had this same problem and I was told to make sure the bobbin is in with the thread coming out ...

...lower thread is cut. Needle goes down but don't pick up the bobbin thread. It come up and tell me that my upper or lower thread is cut. try changing the needle try rethreading the machine top ...

...is threaded second and the lower looper thread tail should drape OVER the upper looper. Then thread the needles. Be sure when threading that each thread is pulled snugly into the tension disks.

...pick up bobbin thread...everything is threaded correctly & I replaced needle...please help double check the upper and lower tensions they often need to be changed to suit types of fabric and ...

top thread will not pick lower thread up and pull it through to thread the lower thread your needle is pushed in to far pull out the needle a bit more out.good luck.

...lower thread at all. How can I fix it back????? Please help me.. Be sure to install a brand new needle. If the machine is threaded correctly and it still will not pick up the thread, the machine has ...

...pick it up easily make sure you have a 3 to 4 inch tail on upper thread also as it picks up the lower thread or you can hold the upper thread with your hand to the side of the machine & use the ...