Brother PE-150V Computerized Sewing Machine > Search
Brother PE-150V Computerized Sewing Machine bobbin thread tension off
White Sewing 2999 bobbin tension Bobbin jumps (followed manual that said the thread was to come off the spool on the left more...
Make sure the thread is running off the bobbin the right direction and is under the auto-tension tab. On the top thread, more...
or mdel machine you have. Bobbin case in your left hand your right hand with the thread leading off from the top, pop the the end of the spring, tension should be enough to pull more...
Make sure the chain stitch thread is threaded exactly as it doubly sure the thread comes off the bobbin vertically and runs through all in the threading causes extra tension at the needle despite what more...
With your drop in bobbin go through the basics because be missing something, when you thread the machine make sure the the thread goes between the tension discs, top tension between 4 it is too tight slacken off the screw on the bobbin more...
it several times, when you thread the machine up make sure the thread goes through the tensions discs completely, set the top small screw slightly on the bobbin until you get some tension, it through, slacken the screw off slightly, try it an see.
Ken more...
miss-ee,
The most common fault is threading machine up without putting the goes completely between the discs, tension should be between 4 and then you need to slacken off the small screw on the bobbin a tiny bit at a more...
Back to Brother PE-150V Computerized... page.
Sponsored Links
Repair Service
Find Sewing Machine Repairman Near You:
= Poor
= Average
= Good
= Excellent
