Brother CS-6000 "zigzag line" Questions

line is to set the zigzag dial to the empty section AND the stitch length to 0. (It seems that stitch length and zigzag width are one and the same.) This produces a straight line, but the stitches are

zigzag more straight line try these suggestions and see if they helpSkipped stitches 1. The needle is not inserted correctly Remove needle & reinsert needle( flat side towards the back of machine)

...line of zigzag stitches, and compare the results at the top and bottom. You will be adjusting your bobbin to your top tension. If the top tension looks like a straight line instead of stitching and ...

...line?? What's the model? Do you have the stitch selector set on straight stitch, or on a stitch with a width component, like a blind hem stitch? Some machines consider straight stitch to be a zigzag ...

...zigzag stitch that wanders and veers instead of going in the straight line you're trying to do. I'm fairly new to sewing and not mechanically inclined, so before I crack the machine open to fix it, ...

...Zigzag requires the needle point to be skewed from the nominal center line or the point at which the hook captures the top thread. This left/right needle movement from the optimal timed position ...

zigzag settings it just goes in a straight line. My stitch length is not at zero, either. What's the problem? I have this same issue with that same machine. Did you ever figure out what was wrong with

line of straight and then zigzag stitches on a scrap of fabric and take a look. It helps to have two different colors of thread, with the fabric a third color. If one side of the zigzag looks fine and

...line. When set on zigzag it produces a great straight line, but the left side of the zigzag stitch looking at top of material is missing . The hole is punched through fabric and almost forms the ...

...lines of stitching but then suddenly stopped working when I switched from a straight stitch to a zigzag). Help! does it sew ok straight stitch but not