...Put thread on spool pin. Pull thread taut. We don't want any thread hanging down over the machine. Pull thread slowly, holding taut, and put through first tension disk, and each successive tension ...
...put thread behind the slot in back of your needle. It's a little groove to hold thread securely. 5. Pull thread toward you 6. Thread needle eye front to back 7. Pick up thread under gently pull ...
Question about Singer Sewing Machines
...put the thread for the needle for a singer sewing machine model 132q? Put spool of good quality thread on the spool pin. Thread comes off spool counterclockwise. Raise your presser foot before you do ...
...put thread into tension bracket, hold thread taut! Put thread in back of needle into another small bracket and pull thread towards you. Time to thread needle: put thread front to back into eye of ...
...thread is of the same weight? Put in a new needle. Also check how you are threading the machine, put your presser foot up and pull on the top thread, it should feed smooth, then put the presser foot ...
...put the thread back and start to sewing, it breaks again and again, but each time it breaks fastter. I appreciate if you could help me to fix this problem. First, make sure that you are threading the ...
...thread and I put it in shop) If you thread the machine with the pressure foot down it closes the symbol things and the thread will break as you described. If you have completed that correctly check ...
...put the thread behind the left side of the threader and loop the thread around toward the needle then go behind the finger of the threader hold the thread back against the needle and slightly pull ...
...thread should now stay put and not jump out of place. If thread lays on bobbin, machine won't stitch properly. Felt spool holder will take up slack so bobbin stops rocking and jumping which causes ...
222 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
150 Questions