...empty bobbin it will not fill. I put empty bobbin on winder slide bobbin over to be filled. Metal bobbin winder moves but " plastic bobbin " does not fill. I have never been so angry and ...
...empty bobbin case onto the bobbin winder in the sewing machine. Step 2 Set the spool of thread onto the thread peg. Use the same thread you want to use on your material to obtain the best finished ...
...empty bobbin. You have to pull out part of the hand wheel, I know, so that the needle doesn't go up and down...and then..just step on the pedal, right? What am I forgetting to do? It's not working ...
...empty bobbin. You can refer to page 12 or the free downloadable manual found at this link: http://www.singerco.com/uploads/download/1230_4411_heavy_duty_esf.pdf Note that the thread must winde around ...
...empty bobbin. Well, you can imagine what happened! When it was empty, I, of course, forgot and put it right back on the winder. What do I do? This will happen if you wind your bobbin at full speed. ...
...bobbin is full of thread the tension has to be stronger than when it is almost empty. So tight when it's full and loose when it's nearly empty. I hope this helps. If this doesn't work try using a air ...
Question about Singer Sewing Machines
...empty bobbin out of bobbin case. Singer sewing machine Most bobbin cases have a release latch that allows the bobbin to drop out of the bobbin case. In the following link, it is the flat lever with ...
Question about Bernina Sewing Machines
...bobbin is empty Use screwdriver to break open bobbin case. Use new bobbin case. Uh, I think I'd take it to a technician. Using a screwdriver to break the case could damage more than just the bobbin ...
...empty bobbin on, and the mechanism had gone back inside the machine a little and would not work. I was able to pull it back into place myself without needing to go to the repair shop. Look carefully ...
...you tighten the bobbin case Hai, Please take one small screwdriver and tighten the bobbin case upper small screw. Otherwise take the one empty bobbin tighten the bobbin case. After check the
222 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
150 Questions
