jams everytime I try to embroidery something the bobbin jams and I have to take the whole thing apart to readjust bobbin case and all. sewing doesn't do it, just embroidery. Please you buy a new model
Question about Euro-Pro Sewing Machines
I have a Euro-Pro 9106. It jammed on me (a couple years ago) and everytime I try to re=use I get a beeping sound. Help. It is a nice machine, don't want to trash it. Cleaned the jam, still ...
everytime I go to sew (or even load the bobbin thread) the cotton gets jammed in or around the bobbin, have I loaded something incorrectly? I've reloaded the bobbin around 15 times now, so I'm
...sewing machine keep gettin jam .. everytime i try to sew something it keeps gettin stuck down the lower thread area It sounds like the shuttle and needle timing needs re-setting. Contact a
...sew it just jamed up and everytime it would jam up it would say E1 and then they fixed it and not its doing the same thing again When that happened to me I had to replace the bobbin case-- (the peice ...
Question about Sewing Machines
...everytime I use it, the thread Jams underneath, how do I stop this? The thread Jams and breaks from underneath when I sew. How can I stop this happening? try changing the needle--normally flat side ...
Question about Brother Sewing Machines
the thread off the bobbin gets jammed everytime. How can I fix th the bobbin gets jammed evertime I go to use it It sounds like you are not threading the machine properly. The best way is to make sure
...everytime i sew something, even using the default built in fonts, the machine keeps jamming and the thread bundles up in the bottom of the machine under the needle where the bobbin thread is supposed ...
...everytime i go to sew with my new sewing machine it jamms... idk whats wrong with it or how to fix it try changing the needle rethread the machine top & bobbinmake sure the bobbin is not fully ...
prolectrix 8 stitch sewing machine top thread keeps getting caught round bobbin housing and jamming everytime i try to use it Sounds like the take-up lever is not threaded. Remove the thread from the ...
70 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions