Question about Brother Sewing Machines
needle to the center, then that is a pretty good option. Most older machines with the offset needles default do not have a centering option. (I have an old Nelco that has an offset default--works just
Question about Sewing Machines
...needle centering issues involve a slight off-center problem that merely requires a slight tweak. However, as it sounds in your case, if the needlebar position is supposedly set to center but it is ...
Question about Sewing Machines
Needle needs adjustment slightly to right, it is hitting left side of hole on baseplate. New needle, correctly set for straight stitch. It needs only a slight adjustment. I need a service manual, the ...
Question about New Home Sewing Machines
My New Home MX3123 sewing machine needle moves from center to right rather than left to center. How do I fix it? The instruction manual ...
timing is messed up, needle keeps breaking the needle and bobbin case doesnt line up right. Kim, there is nothing you can do yourself if the timing is out. But you can check it.- Remove the needle ...
Question about Bernina Sewing Machines
Model 930.Why is presser foot not lined up correctly? needle is hitting the needle plate. Is your needle position centered? The round dial on the top right is a combination zig-zag stitch width ...
Question about Baby Lock Sewing Machines
...the center based on the desired stitch width. I hope this helps. If your sewing machine needle isn't centering the needle correctly when you turn on the machine, it may need to be serviced. Cindy ...
Question about Euro-Pro Sewing Machines
Euro-Pro Shark Sewing machine needle off center, hits needle plate Up until yesterday, my machine was working fine. After attempting to sew with a denim needle, the machine came off center somehow, ...
Why is needle hitting zipper foot on left side only? When the needle is set on the center position, is it centered or is it slightly off center? If so, then the mechanism needs to be adjusted so that ...
needle position needle postion is off center(to the right)the feed dog can be seen on the right of the presser foot only and about 1/16" of it. In looking at the needle plate opening with the needle ...
70 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions