Brother CS-8150 Computerized Sewing Machine "vx 1120 needle" Questions

...VX-1120- The needle is not picking up bobbin thread. My Brother sewing machine VX-1120 is 10 years old. It is not picking up the bobbin thread. I cleaned the bobbin case and changed the needle. Still ...

VX-1120 sewing machine will not pick up the bobbin thread Bobbin in backwards, needle in backwards, needle damaged, needle too small for the thickness of fabric or needle not the correct needle system

...vx-1120 basic sewing machine and my problem is that the needle will not pick up the thread from the bobbin. I don't know this machine but most machines....You are either using a bent, or incorrect ...

VX-1120 sewing machine. The top thread does not go all the way around the bobbin case and catch the bobbin thread. I have replaced the needle and adjusted the tension, but nothing so far has worked. i

vx-1120 needle wont pick up bobbin thread to make a continuous stitch bobbin arm isn't moving at all Install a brand new needle. Make sure it is installed correctly. Remove the bobbin/bobbin case from

...vx 1120 model? The upper thread is not picking up the bobbin thread, a friend said the timing was off, the hook inside the bobbin casing isn't in the right position to pick up the thread. Be sure to ...

...over a few times and the needle thread will pull the bobbin thread up or use a bit of scrap material and start a short sew You should probably have an owner's manual: Brother VX 1120 User Manual

...vx-1120 will not feed fabric This is usually caused by the feed-dog ( the metal teeth in the area below the needle) being down instead of up - run your finger under there (over the teeth) if they do ...

...machine model VX 1120 will not pick up the Bobbin Thread. Machine is fairly new with only several hours use. I have changed needles , tried different bobbins, cleaned the machine. Any