Brother LS-1217 Mechanical Sewing Machine "bobbin thread getting caught feed" Questions

...bobbin thread that the bobbin turns the right way. (mine must spin anti clockwise to work) Make sure that when you pull up the bobbin thread using the needle that it is not over the feed dogs ...

...to sew a seam, hold the upper and bobbin thread tails back and out of the way as you sew your first couple of stitches. This will prevent them from getting caught in your machine. I hope this

...bobbin thread and when i do it slowly the needle thread gets stuck over the feed dogs after a couple of stitches, and the point that pulls the needle thread over the bobbin thread gets stuck and ...

...bobbin thread on computered memorycraft 9000 sewing machine ? top stitch looks good but the bobbin thread clumps and is loose. 1)Check that your bobbin does not have a nick in it where the thread can ...

...rethread the machine making sure to use every thread guide try using a different bobbin--make sure the bobbin is turned the right way make sure the thread has not come off the thread take up ...

...have an a self wind bobbin make sure the bobbin winder is all the way down and no thread caught under it, your machine should be able to cope with thick fabric, slacken the pressure on the presser ...

...thread isn't in the take-up lever properly, erratic problems ensue. Next, try removing the needle plate and bobbin case and inspecting both for any nicks or burrs. (your instruction book will guide ...

...bobbin through. Thread from needle gets caught inside bobbin attachment at the right front on the bobbin case. The feeder dog seems to be moving in reverse. it would really be a good idea to have the ...

My 4000D is not catching the bobbin thread And the hand wheel is stiff when I try to turn it. The thread is getting all caught up under the feed dogs. The material is not feeding also. Needs oil

thread gets caught on the bobbin holder and won't When I try to sew the spool thread gets caught on the bobbin holder and won't stitch. It looks like the thread is being wound around the outside of ...