Question about Sewing Machines
...fix? try reinserting the needles all the way up into the needle holder and tightening the needles up and that will let you know if the needle holder is working or not and if the needles don't stay up ...
...fix this? Is the bobbin holder inserted wrong? change the needle and see if it is still hitting because once they hit the case or the feed dog they very often get bent always change needles with ...
Question about Elna Sewing Machines
My needle holder on the Elna serger 925 DCX broke. How can I fix it? It is the stem connexting the needle holder. You should probably talk to your Elna dealer about getting a replacement part.
Question about PfaFF Sewing Machines
Needle holder will not move up & down needle, machine is seized. This was fixed last week . I was told thread had rapped around the bobbin holder. Now the problem has happen again I would check ...
...fix this myself? When I turn the needle down there is a small click when the thread is supposed to scoop up the bobbin thread, but it doesn't do anything.... I have an ELNA 6600 If you can hear a ...
Question about Sewing Machines
...doun it touches the edge of the face plate, how do I fix this? replace the needle as a means of checking for a bent needle check that you have the needle positioned correctly in the needle ...
Question about Singer Sewing Machines
...needle bar is out of time & need to be servicedIF YOU DO HAVE TO TAKE IT TO BE SERVICED AFTER YOU GET IT HOME STOP RIGHT THEN & SEW ON THE MACHINE TO MAKE SURE THEY FIXED THE MACHINE & IT ...
...fix the needle. I don't explain them, I just know strange things happen when you try to fix one thing. Secondly, I can't tell how old your machine it, but I know that the mechanism that holds the ...
Question about Elna Sewing Machines
fix would be needle in backwards, not fully into the needle holder, or wrong gauge needle for the machine. Or harder to fix, the timing is out. If you have hit something hard while stitching or broken
...fix by myself? The replacement needle has been put in correctly with the flat side to the back. Thanks. I assume you checked to see there are no needle bits in the bobbin case holder. Without looking ...
102 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions