Brother 1034D Mechanical Sewing Machine "serger lower looper keeps breaking" Questions

...serger I have used that you have to cut the looper (bottom) threads before re threading the needle threads. You then rethread the loopers. If you don't do this, the needle threads keep breaking. Hope ...

...serger interlock thread. It will sew about 12-16'' then break. Suggestions please. I will make this easy first always thread the machine upper looper then lower looper then the needles if a thread ...

...serger FunLock DeLuxe 007D and the thread keeps breaking. How do I fix it myself or get it repaired? Which thread, needle threads, or looper threads? If looper threads, be sure to unthread both ...

...Lower Looper "draped" over the top of the Upper Looper.) If a thread breaks, remove the threads and start over from the beginning as trying to fish a thread through the existing threads very SELDOM ...

serger threads, but they are always half-price at hancock... Any other thread I have tried using causes breakage, especially on the the lower looper (the 4th thread). Although, of you keep the tension

...serger almost 2 years ago and i havent really had a good connection with it. i have done, tried changing needles and threading it right but it still doesnt serge as it should be. the loower looper ...

...serger, but with mine, if I the lower looper thread is looped above the upper one(down where they all meet), it will break. Cut your lower looper thread and re thread it making sure its above the ...

lower looper thread finishes by laying Over the top of the upper looper before being pulled toward the back of the presser foot. Confirm that every thread is following the correct path. Any skipped or

...serger, the lower looper has to lay over the top of the upper looper/thread before it all gets pulled under the presser foot toward the back of the machine. It also may help to RAISE the presser foot ...

...lower this thread keeps breaking , HELP Serger thread breaks 1. Is the serger threaded correctly? 2. Is the needles inserted correctly? 3. Is one of the needles bent or damaged? 4. Is the tension ...