Brother 1034D Mechanical Sewing Machine "repair jammed serger" Questions

...jammed from thread or just stopped working. If it is thread, then you will need to carefully use embroidery scissors with a sharp point or a razor blade to cut at the lump of threads and carefully ...

...Serger that much but when I need it, I need it. I was going to take it to a repair shop but he wanted $99 to look and I can't afford that~ any ideas? [email protected] TIPS FOR SUCCESSFUL SERGING ...

serger jammed-stupidly fed too much fabric through and machine jammed. changed needles but didn't help. Needles hit steel casing of inner workings when I turn handwheel. Is this a timing problem now ...

jammed, squeaky hand wheel? A couple weeks ago, my serger was giving off a burning smell and slowed down to a stop. I took it in to get it repaired and was told it just needed cleaned and oiled. After

Singer Overlocker/Sergers require particular threading order. If that does not help you may as I did have to take it to an Authorised repairer. It has to be a Singer Authorised as they have done ...

...sew machine stopped in the middle of my project Call your Viking dealer or a repair person. Unplug machine and check everything to make sure thread has not jammed anywhere - unthread and re thread

repair? My 1150 serger was jammed because the brush was caught under the mechanism The stitch plate was bent at the lip and I was given a choice of replacing the stitch plate or bending the plate back

...jammed up that it can not go forward or reverse. I can turn the wheel just so far. I rethreaded and cleaned everything. When the needles go down to the bottom feeds they rub against the bottom thread ...

...serger won't close properly. It won't slide all the way to the left and isn't flush to the machine. There is nothing jamming it. My 2 year old tried to shut it but broke it instead:-( If you need a ...

...serger machine is very noisy / squealling; oiled / cleaned machine, changed needles... It gets quieter if I sew fast. some machine make more noise than others,  but to be on the safe side I ...