...uneven winding of the bobbin, sometimes the spool of thread winds unevenly when it travels up and down the spool. the best solution i have found is to use small spools of thread when winding the ...
Question about Dual Sew Sewing Machines
...uneven, too. I have adjusted the tension on my sewing machine, but the bobbin thread has loops that catch and won't allow the fabric to feed through the machine unless I help it through. Also the ...
...uneven tension between the bobbin thread and the upper thread. You can adjust the tension via a screw on the bobbin case. Turn it clockwise to tighten the bobbin thread tension and counter clockwise ...
...uneven, the bottom stitch looks fine but the top is loose, I tried out the tension but no change first ,re thread the upper bobbin, check the needle to match the fabric and the lower bobbin thread ...
Question about Sewing Machines
...stitching issues. Ensure that both the upper and bobbin threads are properly threaded and the tension settings are adjusted correctly. Check the machine's manual for specific instructions on setting ...
bobbin stich is uneven and a tangled mess you can dowload a manual from the singer website http://www.singerco.com/accessories/manuals.html If the bottom stitching is uneven, its mostly the top thread
Question about Sewing Machines
...uneven. Sewingmachine troubleshooting guide. Install a brand new needle. The old needle may be bent, dull, or defective.
Use the correct needle and thread suitable for the fabric you are ...
stitching. Have you embroidered successfully on this machine in the past and this problem has now occured? If so, I would take it back to the dealer and ask him to test sew a design with it and see if
...I am sewing it the fabric is getting pulled into the machine, and the bottom stitching is all uneven. hold your top and bobbin thread for at least 5 stitches, and that the machine is threaded
Question about Kenmore Sewing Machines
...up bobbin thread on the left side of the stitch. It is a kenmore 385.16221301 For this issue, you may want to take it for service. Something may be out of adjustment causing the uneven tension.
915 questions posted
Usually answered in minutes!
337 Questions
294 Questions
223 Questions
181 Questions
150 Questions